An Aggressively Calibrated Trail Snowmobile with Firm Suspension

Dial up any trail on the map and tackle it with confidence. ZR Sno Pro’s aggressively calibrated Arctic Cat IFP ski shocks and rear shocks give you a firm, solid ride that hugs the trail.

Features

  • LOWERED RIDE HEIGHT AND 1.0 IN. RIPSAW TRACK: With a lower ride height, the ZR Sno Pro is built for speed, letting you hug every turn, and race down every straightaway. Plus, it features a 1.0-inch Ripsaw Track to enhance speed, traction and handling. Its aggressive, angled lugs grip the trail, while the chopped design provides unmatched handling, acceleration and hard packed surfaces. The narrow lug base reduces rolling when you open it up. Built for long-term durability over miles and miles of rides, the Ripsaw Track makes the most of ZR Sno Pro's power and precision.
  • ARCTIC CAT IFP GAS SHOCKS: Arctic Cat IFP coil-over shocks are engineered with a hard-anodized 1.5-in. aluminum body; 0.5- in. shaft; aluminum internal floating piston; and high-quality seals and ice scrapers.
  • ARS II FRONT SUSPENSION: The next level of Arctic Race Suspension (ARS) is here. ARS II gives you better bite on corners and increased ground clearance to deliver more confidence on- or off-trail. We made the forged aluminum spindles 1.5 inches taller from the ski to the lower arm, and gave it more rigid upper A-Arms. Plus, a revised geometry delivers a new roll-center and adjustable cambers, and a swaybar makes for flatter, more predictable cornering on hard pack trails.
  • 137 IN. SLIDE-ACTION REAR SUSPENSION: Unlock the true potential of a coupled suspension with our unique SLIDE-ACTION design. The front arm fits into a U-shaped slot that allows 0.5 inches of sliding movement, so the front arm won’t collapse whenever the rear arm compresses. That unique design gives you the full benefit of coupling: controlled ski lift during acceleration and the complete use of the front arm at all times. SLIDE-ACTION suspension also allows a lower and more consistent track tension with its Torque-Sensing Link, plus three-position rear coupling block adjustability, adjustable spring preload and a durable 3-wheel rear axle assembly.
  • 6000 SERIES C-TEC2 ENGINE: The first clean technology Arctic Cat 2-stroke engine, the 6000-Series 599cc C-TEC2 with Dual-Stage Injection (DSI) leads the 125-hp class in performance. It features batteryless EFI; electric oil pump; APV electronic exhaust valves; Exhaust Pipe Temperature Sensor (EPTS); knock sensor; and engine reverse technology. It’s exceedingly robust and lightweight.
  • 5.5IN. RACE-HEIGHT WINDSHIELD: A lower-profile, race-ready windshield gives you a new level of visibility.
  • PUSH-BUTTON ELECTRIC START: Get the convenience and ease of electric start with a handlebar-mounted button.
  • ADJUSTABLE 42"-43" SKI STANCE: Easily adjust your ski stance — From 42- to 43-inches wide.

General Information

Manufacturer Arctic Cat
Model Year 2020
Model ZR 6000 SNO PRO ES
Model Code S2020ZXDSPUSG
Color Charcoal / Green

Dimensions

Length Overall - 125 in.
Height Overall - 48 in.
Width Overall - 48-49 in.
Weight Dry - 504 lb.

Engine & Drivetrain

Engine 6000 C-TEC2, 2-stroke
Cylinders 2
Cooling

Liquid

System capacity - 6 qt.

Displacement 599 cc
Bore x Stroke 73.8 x 70 mm
Fuel System Dual stage injection
Starting Electric push button
Ignition

Digital controlled CDI

Engine stator output - 270 W @ 3000 RPM

Lubrication Electronic injection
Drive System Arctic Drive System
Drive Clutch TEAM Rapid Response II
Driven Clutch TEAM Rapid Reaction BOSS
Drive Sprocket Track - 9 Tooth, 2.86 pitch, Involute
Clutch Calibration 0 - 5,000 ft.
Reverse Push-button
Transmission

Gearing - 22/48

Chain pitch - 90

Exhaust APV with tuned pipe, pipe sensor and stainless steel manifold and muffler
Brakes Stealth hydraulic master cylinder
Fuel Type Minimum octane - 91
Fuel Capacity 11.7 gal.
Oil Capacity 3.25 qt.

Operational

Handlebar Hooked, 5.5 in. riser
Instrumentation

Deluxe digital: speedometer, tachometer, odometer, fuel, coolant (indicator light), clock, battery voltage, altimeter and hours

Oil indicator light

Seating or Rider capacity High performance
Skis

Type - Trail

Width - 6 in.

Runner type - single with carbide

Ski Stance 42 - 43 in. Adjustable
Track Type Ripsaw 1.0
Track LxWxH 137 x 15 x 1.0 in.
Pitch 2.86 in.

Other

Includes 5.5 in. Race-height windshield, 12V outlet, hand and thumb warmers, sport front bumper, standard brake disc, standard steering, tether switch
Safety Features LIghting - dual halogen 2-bulb

Suspension

Shocks

Ski - Arctic Cat IFP 1.5A

Front track - Arctic Cat IFP 1.5

Rear track - Arctic Cat IFP 2.0

Front Suspension

Arctic Race Suspension (ARS) II with swaybar

Travel - 10 in.

Rear Suspension

SLIDE-ACTION with 3 wheel rear axle assembly, coupling blocks, torque-sensing link rear arm and adjustable torsion springs

Travel - 13.5 in.

2020 Arctic Cat ZR 6000 SNO PRO ES

/